Installation of Spinnaker Crane (IP38)

Visibility Public

by James Metcalf 04 December 2005 Rigging 8 photos 10266 views

While in Mexico I installed a spinnaker crane on the masthead of my Isomat mast, (along with replacing the anchor light with a tri-color).

Orignal anchor light and no spinnaker crane. Front has wind annometer attached and rear has windex.

Blk cover secured w/2 screws;front is "lipped" into the masthead. Remove screws and lift off.

With cover removed.

Masthead without cover.

Mount plate on ft of assy, must clear Black cover when re-attached

Crane in place, is pre-drilled, you must drill holes in alum. masthead.

Top view, Black cover replaced; the black box on top is base for tri-color

Can't really see it but there are 2 blocks on the crane with a spinnaker halyard thru ea.

Disclaimer

Sincerely,

The International IPYOA administration team.