320 Holding Tank Fix

Visibility Public

by David Bowler 24 June 2009 Plumbing 11 photos 5720 views

Photos of 320 holding tank repair. The repair involves cutting a access hole in the floor to insert a 25 gallon Nauta bladder tank inside the existing aluminum tank.

Cut using a router with a 9/16 blade. The depth is set to the thickness of the plywood.

The Tank is not yet cut. The trim for the cut floor and ¼ in lip can be seen.

New hatch to the right, Existing hatch on left.

Back of new hatch (old cutout with trim and sub floor removed)

Top of new hatch

Looking inside tank after aluminum cut

Inside tank, baffle to the right in center of tank.

Thank partially cleaned, hole in tank next to tank outlet. Other holes were along the baffle.

Baffle after making two horizontal cuts, cold chisel used to separate baffle from tank.

Tank box drawing from IP factory.

Tank drawing from factory

Disclaimer

Sincerely,

The International IPYOA administration team.