- Posts: 6
- Thank you received: 3
Pacific Star, IP35-058 completes circumnavigation 2007 -2013
13 years 4 months ago - 12 years 3 months ago #2120
by Horst
Ahoy from Horst and Julia - we crossed our outbound track from Puerto Vallarta/ Mexico to the Marquesas in March and completed our 6 year circumnavigation. Our home base is Emery Cove Marina in San Francisco. Our cruising reports can be found in the 'Changes' of the Latitude 38 magazine. Highlights were Moorea, Aitutaki, Nue, Fidji, New Zealand, Indonesia, Maldives, Pirate Alley, Israel, Greece, Istanbul, Rome, the French Canals including Paris, St.Catherine's Dock in London, Scottland, Ireland, Terceira/Azores, San Blas islands. Our little ship Pacific Star has held up and taken care of us very well. Good sails including full batten main, triradial Genoa, a high cut jib for hard upwind work and a large asymmetrical spinnaker keep the boat moving well. Upwind motorsailing is well supported with staysail and reefed main. Our Yanmar 35HP has now 5500 hrs and is still going strong - with a heavy cruising boat a bit underpowered, about 10 more HP would be desirable. I plan to replace all the chain plates, the fuel, water and holding tank and eventually the engine before heading back out there. A top down furler for the asymmetrical chute is also on my wish list.
Cheers Horst SV Pacific Star
Cheers Horst SV Pacific Star
Last edit: 12 years 3 months ago by Horst.
Please Log in or Create an account to join the conversation.
13 years 4 months ago #2121
by hayden
Hayden Cochran
IP35-165 Island Spirit
IslandSpirit35.blogspot.com
Rock Hall, MD
Replied by hayden on topic Re: Pacific Star, IP35-058 completes circumnavigation 2007 -2013
Horst:
Big congrats on your world tour circumnavigation, that has to be the best feeling of accomplishment. I cannot imagine.
I too was looking at doing the chain plates myself, I knew I could rip them out, but I felt I had no skill at fiberglass work, so I sent our boat to the factory. I know others that have done this and it is possible to do yourself. It just takes time. Keep us posted on your progress.
Thank you.
Hayden
Big congrats on your world tour circumnavigation, that has to be the best feeling of accomplishment. I cannot imagine.
I too was looking at doing the chain plates myself, I knew I could rip them out, but I felt I had no skill at fiberglass work, so I sent our boat to the factory. I know others that have done this and it is possible to do yourself. It just takes time. Keep us posted on your progress.
Thank you.
Hayden
Hayden Cochran
IP35-165 Island Spirit
IslandSpirit35.blogspot.com
Rock Hall, MD
Please Log in or Create an account to join the conversation.
Time to create page: 0.046 seconds